Filter
Top Products
Configuring System Information 89
Unit No.
— Indicates the unit number for which the device asset information is displayed.
Service Tag
— The service reference number used when servicing the device.
Asset Tag (0-16 Characters)
— Indicates the user-defined device reference.
Serial No.
— The device serial number.
Defining System Information
1
Open the
Asset page
.
2
Define the relevant fields.
3
Click
Apply Changes
.
The system parameters are defined, and the device is updated.
Initiating a Telnet Session
1
Open the
Asset page
.
2
Click
Telnet
.
A Telnet session is initiated.
Configuring device Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing and setting fields
displayed in the
Asset
page
.
Table 6-12. Asset CLI Commands
CLI Command Description
hostname
name
Indicates or modifies the device host name.
snmp-server contact
text
Sets up a system contact.
snmp-server location
text
Enters information on where the device is located.
clock set
hh
:
mm
:
ss day month
year
Manually sets the system clock and date.
show clock [detail]
Displays the time and date from the system clock.
show system id
Displays the service tag information.
show system
Displays system information.
asset-tag
text
Sets the device asset tag.
show stack <1-6>
Displays the system stack information.
show system [unit
unit
]
Displays system information.
show system id [unit
unit
]
Displays system identity information.