Filter
Top Products
Configuring Quality of Service 377
Enabling Trust Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
Global
Settings
page.
The following is an example of the CLI commands:
Defining QoS Interface Settings
The
Interface Settings
page contains fields for deactivating the Trust mode, and setting the default
CoS value on incoming untagged packets. To open the
Interface Settings
page, click
Quality of
Service
→
QoS Parameters
→
Interface Settings
in the tree view.
Figure 9-2. Interface Settings
Table 9-109. QoS Settings CLI Commands
CLI Command Description
qos trust
[
cos
|
dscp
] Configures the system to trust mode.
no qos trust
Returns to the non-trusted state.
console(config)# qos trust dscp