Filter
Top Products
282 Configuring Switch Information
www.dell.com | support.dell.com
Enabling STP on a Port
1
Open the Spanning Tree
Port Settings
page.
2
Select the port.
3
Select
Enabled
in the
STP
field.
4
Define the
Fast Link
,
Path Cost
, and the
Priority
fields.
5
Click
Apply Changes
.
STP is enabled on the port.
Modifying STP Port Properties
1
Open the Spanning Tree Port Settings page.
2
Select the port.
3
Modify the relevant fields.
4
Click
Apply Changes
.
The STP port parameters are modified, and the device is updated.
Displaying the STP Port Table
1
Open the Spanning Tree Port Settings page.
2
Click
Show All
.
The
STP Port Table
opens.
Defining STP Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port parameters
as displayed in the
STP Port Settings
page.
Table 7-75. STP Port Settings CLI Commands
CLI Command Description
spanning-tree disable
Disables spanning tree on a specific port.
spanning-tree cost
cost
Configures the spanning tree cost
contribution of a port.
spanning-tree port-priority
priority
Configures port priority.
show spanning-tree [ethernet
interface
| port-channel
port-channel-
number
][instance
instance-
id
]
Displays spanning tree configuration.