Dell 34XX Computer Accessories User Manual


 
Configuring Switch Information 329
Defining Ports to Receive Multicast Service
1
Open the
Bridge Multicast Group
page.
2
Define the
VLAN ID
and the
Bridge Multicast Address
fields.
3
Toggle a port to
S
to join the port to the selected Multicast group.
4
Toggle a port to
F
to forbid adding specific Multicast addresses to a specific port.
5
Click
Apply Changes
.
The port is assigned to the Multicast group, and the device is updated.
Assigning LAGs to Receive Multicast Service
1
Open the
Bridge Multicast Group
page.
2
Define the
VLAN ID
and the
Bridge Multicast Address
fields.
3
Toggle the LAG to
S
to join the LAG to the selected Multicast group.
4
Toggle the LAG to
F
to forbid adding specific Multicast addresses to a specific LAG.
5
Click
Apply Changes
.
The LAG is assigned to the Multicast group, and the device is updated.
Managing Multicast Service Members Using CLI Commands
The following table summarizes the equivalent CLI commands for managing Multicast service
members as displayed in the
Bridge Multicast Group
page.
Table 7-91. Multicast Service Member CLI Commands
CLI Command Description
bridge multicast address
{
mac-multicast-
address
|
ip-multicast-address
}
Registers MAC-layer Multicast
addresses to the bridge table, and adds
static ports to the group.
bridge multicast forbidden address
{
mac-multicast-address
|
ip-multicast-
address
}[
add
|
remove
]
{
ethernet
interface-list
|
port-channel
port-
channel-number-list
}
Forbids adding a specific Multicast
address to specific ports. Use the no
form of this command to return to
default
show bridge multicast
address-table
[
vlan
vlan-
id
]
[
address
{
mac-
multicast-address
|
ip-multicast-
address
}
]
[
format
ip
|
mac
]
Displays Multicast MAC address table
information.