Filter
Top Products
Configuring Switch Information 313
Enabling GVRP on the Device
1
Open the
GVRP Global Parameters
page.
2
Select
Enable
in the
GVRP Global Status
field.
3
Click
Apply Changes
.
GVRP is enabled on the device.
Enabling VLAN Registration Through GVRP
1
Open the
GVRP Global Parameters
page.
2
Select
Enable
in the
GVRP Global Status
.
3
Select
Enable
in the GVRP State field for the desired interface.
4
Select
Enable
in the
GVRP Registration
field.
5
Click
Apply Changes
.
GVRP VLAN Registration is enabled on the port, and the device is updated.
Configuring GVRP Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring GVRP as displayed
in the
GVRP Global Parameters
page.
Table 7-85. GVRP Global Parameters CLI Commands
CLI Command Description
gvrp enable (
global
)
Enables GVRP globally.
gvrp enable
(interface) Enables GVRP on an interface.
gvrp vlan-creation-forbid
Enables or disables dynamic VLAN creation.
gvrp registration-forbid
De-registers all dynamic VLANs, and
prevents dynamic VLAN registration on the
port.
show gvrp configuration
[
ethernet
interface
|
port-channel
port-channel-
number
]
Displays GVRP configuration information,
including timer values, whether GVRP and
dynamic VLAN creation is enabled, and
which ports are running GVRP.
show gvrp error-statistics
[
ethernet
interface
|
port-channel
port-channel-
number
]
Displays GVRP error statistics.
show gvrp statistics
[
ethernet
interface
|
port-channel
port-channel-number
]
Displays GVRP statistics.
clear gvrp statistics
[
ethernet
interface
|
port-channel
port-channel-number
]
Clears all the GVRP statistics information.