Dell 34XX Computer Accessories User Manual


 
Configuring System Information 119
Modifying an SNTP Server
1
Open the
SNTP Servers
page.
2
Click
Show All.
The
SNTP Servers Table
opens.
3
Select an SNTP Server entry.
4
Modify the
relevant fields.
5
Click
Apply Changes
.
The SNTP Server information is updated.
Deleting the SNTP Server
1
Open the
SNTP Servers
page.
2
Click
Show
All.
The
SNTP Servers Table
opens.
3
Select an
SNTP Server
entry.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The entry is removed, and the device is updated.
Defining SNTP Servers Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Server
page.
The following is an example of the CLI commands:
Table 6-22. SNTP Server CLI Commands
CLI Command Description
sntp server
ip-
address
|
hostname
[
poll
] [
key
keyid
]
Configures the device to use SNTP to request and
accept SNTP traffic from a server.
Console(config)# sntp server 100.1.1.1 poll key 10