Dell 34XX Computer Accessories User Manual


 
154 Configuring System Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
NOTE: The cable length returned by the Integrated Cable Tester (ICT) is an approximation in the ranges
of up to 50 meters, 50m-80m, 80m-110m, 110m-120m, or more than 120m. The deviation may be up to
20 meters, and cable length measurement does not operate for 10 Mbps links.
Viewing Optical Transceiver Diagnostics
Use the
Optical Transceiver
page to perform tests on Fiber Optic cables. To open the
Optical
Transceiver
page, click
System
Diagnostics
Optical Transceiver
in the tree view.
. NOTE: Optical transceiver diagnostics can be performed only when the link is present.
Figure 6-37. Optical Transceiver
console> enable
Console# test copper-port tdr 1/e3
Cable is open at 100 meters.
Console# show copper-port cable-length
Port Length (meters)
---- ---------------
1/e3 110-140
1/e4 Fiber