Filter
Top Products
142 Configuring System Information
www.dell.com | support.dell.com
Figure 6-23. Remote Log Server Settings
The
Remote Log Server Settings
page contains the following fields:
Available Servers
— Servers to which logs can be sent.
UDP Port (1-65535)
— The UDP port from which the logs are sent. The default value is 514.
Facility
— A user-defined application from which system logs are sent to the remote server. Only
one facility can be assigned to a single server. If a second facility level is assigned, the first facility
level is overridden. All applications defined for a device use the same facility on a server. The
possible field values are
Local 0
-
Local 7
.
Description
—The server description. The maximum length is 64 characters.
Severity
— The log severity. Selecting a severity level automatically selects all higher severity levels.
Delete Server
— Deletes a server from the
Available Server
list. Checking the check box deletes
the server from the list. Leaving the box unchecked maintains the server in the list.
The
Remote Log Server Settings
page also contains a severity list. The severity definitions are the
same as the severity definitions on the
RAM Log Table
page.
Sending Logs to a Server
1
Open the
Remote Log Server Settings
page.
2
Define the
UDP Port
,
Facility
, and
Description
fields.
3
Select the log type and log severity by using the
Log Parameters
check boxes.
NOTE: When you select a severity level, all higher severity levels are automatically selected.