Filter
Top Products
Cable Colors
Attaching and Removing the Computer Stand
The computer can be used in either a vertical or horizontal position.
To use the computer in a vertical position, you must attach the computer stand:
1. Place the computer on its right side so that the drive bays are at the bottom.
2. Fit the stand onto what was the left side of the computer:
a. Position the stand as shown in the following illustration by aligning the large round hole in the stand with the securing button on the side of the
cover and aligning the captive screw in the stand with the screw hole in the cover.
b. When the stand is in place, tighten the thumbscrew.
3. Rotate the computer so that the stand is at the bottom and the drives are at the top.
1
hard drive
6
system board
2
floppy drive
7
power supply
3
CD/DVD drive
8
padlock ring
4
internal speaker
9
heat sink and blower assembly
5
chassis intrusion switch
Hard drive
Blue pull tab
Floppy drive
Black pull tab
CD/DVD drive
Orange pull tab