Filter
Top Products
162 Configuring System Information
Removing a Rule
1.
Open the
Access Profile
page.
2.
Click
Show All
to display the
Profile Rules Table
page.
3.
Select a rule.
4.
Check the
Remove
check box.
5.
Click
Apply Changes
.
The rule is removed, and the device is updated.
Defining Access Profiles Using CLI Commands
For information about the CLI commands that perform this function, see the
Management ACL
Commands
chapter in the
CLI Reference Guide
. The following table summarizes the equivalent CLI
commands you use to define access profiles.
Authentication Profiles
User authentication occurs locally and on an external server. Use the Authentication Profiles page to
select the user authentication method on the device.
To display the Authentication Profiles page, click System
→
Management Security
→
Authentication
Profiles in the tree view.
Table 6-22. Access Profiles Commands
CLI Command Description
management access-class Defines which management access-list is used.
management access-list Defines a management access-list, and enters the access-list for
configuration.
permit (management) Defines a permit rule.
show management access-class Displays the active management access-list.
show management access-list Displays management access-lists.