Filter
Top Products
Configuring System Information 175
3.
Define the
Line Password
field for the type of session you use to connect to the device.
4.
Confirm the
Line Password
.
5.
Click
Apply Changes
.
The line password for the type of session is defined, and the device is updated.
Assigning Line Passwords Using CLI Commands
For information about the CLI commands that perform this function, see the
AAA Commands
chapter
in the
CLI Reference Guide
. The following table summarizes the equivalent CLI commands you use.
Enable Password
Use the Enable Password page to set a local password to control access to normal and privilege levels.
To display the Enable Password page, click System
→
Management Security
→
Enable Password in the
tree view.
Figure 6-49. Enable Password
The Enable Password page contains the following fields:
•
Enable Password (8
–
64 characters) —
The Enable password for controlling access to normal and
privilege levels. The password appears in the ***** format.
•
Confirm Enable Password
— Confirms the new Enable password. The password appears in the *****
format.
Defining Enable Passwords
1.
Open the
Enable Password
page.
2.
Specify the Enable
password.
Table 6-27. Line Passwords Commands
CLI Command Description
password Specifies the password for a line (console, telnet, or SSH).