Filter
Top Products
Configuring Routing 525
Area Range Configuration
Use the OSPF Area Range Configuration
page to configure and display an area range for a specified
NSSA.
To display the page, click Routing
→
OSPF
→
Area Range Configuration in the tree view.
Figure 9-9. OSPF Area Range Configuration
The OSPF Area Range Configuration page contains the following fields:
•
Area ID
— Select the area for which data is to be configured from the drop-down menu.
•
IP Address
— Enter the IP Address for the address range for the selected area.
•
Subnet Mask
— Enter the Subnet Mask for the address range for the selected area.
•
LSDB Type
— Select the type of Link Advertisement associated with the specified area and address
range. The default type is 'Network Summary.'
•
Advertisement
— Select Enable or Disable from the drop-down menu. If you selected Enable the
address range is advertised outside the area through a Network Summary LSA. The default is Enable.
•
Add
— Check the Add check box if you wish to add an area range.
OSPF Area Range Table
•
Area ID
— Displays the OSPF area.
•
IP Address
— Displays the IP address of an address range for the area.
•
Subnet Mask
— Displays the subnet mask of an address range for the area.
•
LSDB Type
— Displays the link advertisement type for the address range and area.
•
Advertisement
— Displays the advertisement mode for the address range and area.
•
Remove
— Removes the specified area entry.