Filter
Top Products
Configuring Switching Information 447
The following table summarizes the equivalent CLI commands for this feature.
DAI Statistics
Use the DAI Statistics page to display the statistics per VLAN.
To display the DAI Statistics page, click Switching
→
Dynamic ARP Inspection
→
Statistics in the
navigation tree.
Figure 7-113. Dynamic ARP Inspection Statistics
The Dynamic ARP Inspection Statistics page contains the following fields:
•
VLAN ID
— Select the DAI-enabled VLAN ID for which to display statistics.
•
DHCP Drops
— The number of ARP packets that were dropped by DAI because there was no
matching DHCP snooping binding entry found.
•
ACL Drops
— The number of ARP packets that were dropped by DAI because there was no matching
ARP ACL rule found for this VLAN and the static flag is set on this VLAN.
•
DHCP Permits
— The number of ARP packets that were forwarded by DAI because there was a
matching DHCP snooping binding entry found.
•
ACL Permits
— The number of ARP packets that were permitted by DAI because there was a
matching ARP ACL rule found for this VLAN.
Table 7-62. Dynamic ARP Inspection Rule Command
CLI Command Description
permit ip host mac host Configures a rule for a valid IP address and MAC address combination
used in ARP packet validation.