Filter
Top Products
586 Configuring Routing
Figure 9-42. VLAN Routing Summary
The VLAN Routing Summary page displays the following fields:
•
VLAN ID
— The ID of the VLAN whose data is displayed in the current table row.
•
MAC Address
— The MAC Address assigned to the VLAN Routing Interface.
•
IP Address
— The configured IP address of the VLAN Routing Interface.
NOTE: If a VLAN is created and the IP address is not configured, the web page by default shows an IP address of
0.0.0.0. To configure the IP address, go to the Routing
→
IP
→
Interface Configuration page. See "IP Interface
Configuration" on page 512.
•
Subnet Mask
— The configured subnet mask of the VLAN Routing Interface. This is 0.0.0.0 when the
VLAN Routing Interface is first configured and must be entered on the
Routing
→
IP
→
Interface
Configuration
page.
Displaying the VLAN Routing Summary Using CLI Commands
For information about the CLI commands that perform this function, see the following chapters in the
CLI Reference Guide:
• IP Addressing Commands
• Virtual LAN Routing Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 9-37. VLAN Routing Summary Commands
CLI Command Description
interface vlan Enters the interface configuration (VLAN) mode.
interface range vlan Enters the interface configuration mode to configure multiple VLANs.
name Configures a name to a VLAN.
show ip vlan Displays the VLAN routing information for all VLANs with routing
enabled.
vlan routing Enables routing on a VLAN.