Filter
Top Products
362 Configuring Switching Information
–
Dynamic
— Indicates the VLAN was dynamically created through GVRP.
–
Static
— Indicates the VLAN is user-defined and may be modified.
–
Default
— Indicates the VLAN is the default VLAN.
•
Remove VLAN
— Removes the displayed VLAN from the VLAN Membership Table when checked.
The VLAN Membership tables display which Ports and LAGs are members of the VLAN, and whether
they’re tagged (T), untagged (U), or forbidden (F). The tables have two rows: Static and Current. Only
the Static row is accessible from this page. The Current row is updated either dynamically through
GVRP or when the Static row is changed and Apply Changes is clicked.
There are two tables in this section of the page:
•
Ports
— Displays and assigns VLAN membership to ports. To assign membership, click in
Static
for a
specific port. Each click toggles between U, T, and blank. See the following table for definitions.
•
LAGs
— Displays and assigns VLAN membership to LAGs. To assign membership, click in
Static
for a
specific LAG. Each click toggles between U, T, and blank. See the following table for definitions.
Adding New VLANs
1.
Open the
VLAN Membership
page.
2.
Click
Add
.
The
Add VLAN
page displays.
Table 7-25. VLAN Port Membership Definitions
Port Control Definition
T Tagged: the interface is a member of a VLAN. All packets forwarded by the
interface are tagged. The packets contain VLAN information.
U Untagged: the interface is a VLAN member. Packets forwarded by the
interface are untagged.
F Forbidden: indicates that the interface is forbidden from becoming a
member of the VLAN.
Blank Blank: the interface is not a VLAN member. Packets associated with the
interface are not forwarded.