Filter
Top Products
326 Configuring Switching Information
4.
Use the
Unit
drop-down menu to view the
Protected Port Summary
table for other units in the stack,
if they exist.
Adding Protected Port Groups
1.
Open the
Protected Port Configuration
page.
2.
Click
Add
.
The
Add Protected Group
displays.
Figure 7-24. Add Protected Port
3.
Use the drop-down menu to assign the numeric designation 0, 1, or 2 to the
Protected Group ID
.
4.
Enter a
Protected Group Name (1–32 characters)
.
5.
Click
Apply Changes
.
The Protected Group settings are copied, and the device is updated.
Configuring Protected Ports With CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Switchport Protected Commands
The following table summarizes the equivalent CLI commands for this feature.
LAG Configuration
Link Aggregation allows one or more full-duplex Ethernet links to be aggregated together to form a Link
Aggregation Group (LAG). The switch can treat LAG as if it were a single link.
Table 7-13. Protected Port Commands
CLI Command Description
show switchport protected Displays protected group/port information.
switchport protected Configure a protected port.
switchport protected name Configures a name for a protected group