Filter
Top Products
To check the size of the S2D file, at an MS-DOS prompt type phdisk /info and press
<Enter>.
If you need to delete the S2D file, at an MS-DOS prompt type
phdisk /delete /partition and press <Enter>.
NOTICE: The S2D file is placed in your computer's root directory, where it may be a
hidden file, depending on how you set up your operating system. Do not delete the file
inadvertently.
To restore the default boot sequence, perform the following steps:
Turn on or restart the computer.1.
Press <F2> as soon as you see the Dell logo screen to enter the system setup program.
If you wait too long and the operating system begins to load into memory, let the
computer complete the load operation. Then shut down the computer and try again.
2.
Enter the Boot screen, and press <F9> to restore the default boot sequence.3.
Press <F10> to save the settings and exit the system setup program.4.
Back to Contents Page
Suspend-to-Disk Utility: Dell Latitude LS Portable Computers User's Guide
file:///C|/Documents and Settings/Administrator/De...p/New Web/Documentation/LS/LS User's Guide/s2d.htm (4 of 4) [5/31/2000 9:48:32 AM]