Filter
Top Products
Two lines at the bottom of the screen make up the menu area. The first line lists the categories you can select; press the left- or
right-arrow key to highlight a menu category. The second line gives information about the category currently highlighted.
●
NOTE: The options displayed on your screen should reflect the hardware configuration of your computer.
Figure 2. Dell Diagnostics Main Screen
Confirming the System Configuration Information
When you boot your computer from the Dell System Software CD, the diagnostics checks your system configuration information and
displays it in the Device Groups area on the main screen.
The following sources supply this configuration information for the diagnostics:
The system configuration information settings (stored in nonvolatile random-access memory [NVRAM]) that you selected while
using the system setup program
●
Identification tests of the microprocessor, the video controller, the keyboard controller, and other key components●
Basic input/output system (BIOS) configuration information temporarily saved in RAM●
Do not be concerned if the Device Groups area does not list the names of all the components or devices you know are part of your
computer. For example, you may not see a printer listed, although you know one is attached to your computer. Because your printer is
a parallel communications device, the computer recognizes the printer by its LPT1 address and identifies it as a parallel port. You can
test your printer connection in the Parallel Ports tests.
Dell Diagnostics: Dell Latitude LS Portable Computers User's Guide
file:///C|/Documents and Settings/Administrator/De.../New Web/Documentation/LS/LS User's Guide/diag.htm (3 of 4) [5/31/2000 9:45:31 AM]