Filter
Top Products
140 Removing and Installing Parts
Media Card Reader
For information on using the Media Card Reader, see "Using a Media Card
Reader" on page 47.
Removing a Media Card Reader
CAUTION: Before you perform any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer chassis.
1
Follow the procedures in "Before You Begin" on page 99.
2
Lay the computer on its side so that the system board is on the bottom of
the inside of the computer.
3
Remove the computer cover (see "Removing the Computer Cover" on
page 101).
4
Remove the drive panel (see "Removing the Drive Panel" on page 124).
1 Media Card Reader (not present on all computers) 2 USB cable
2
1
book.book Page 140 Tuesday, November 27, 2007 10:29 AM