Filter
Top Products
42 Setting Up and Using Your Computer
Enabling the QRT Feature in System Setup
The QRT drivers must be installed before the Quick Resume feature becomes
active. The QRT drivers are installed when this option is ordered. Also, Quick
Resume is enabled in system setup when this feature is ordered.
1
Enter system setup (see "Entering System Setup" on page 179).
2
Press the arrow keys to highlight the
Power Management
menu option,
then press <Enter> to access the menu.
3
Press the up- and down-arrow keys to highlight the
Quick Resume
option,
then press <Enter> to access the menu.
4
Press the left- and right-arrow keys to highlight the
On
option, and then
press <Enter> to enable the Quick Resume feature.
Enabling the QRT Feature in the Operating System
1
Click the
Start
button, then click
Control Panel
.
2
Click the
Away
tab.
3
Ensure that the check boxes for
Enable away mode
and
Options
are checked.
4
Click the
Advanced
tab.
5
From the
When I press the power button on my computer
drop-down
menu, select
Do Nothing
.
6
From the
When I press the sleep button on my computer
drop-down
menu, select
Do Nothing
.
Using Multimedia
Playing CDs or DVDs
NOTICE: Do not press down on the CD/DVD tray when you open or close it. Keep
the tray closed when you are not using the drive.
NOTICE: Do not move the computer while playing CDs or DVDs.
1
Press the eject button on the right corner of the drive.
2
Place the disc, label side up, in the center of the tray.
3
Press the eject button or gently push in the tray.
book.book Page 42 Tuesday, November 27, 2007 10:29 AM