Filter
Top Products
Removing and Installing Parts 145
5
Slide the drive release mechanism to the right to release the shoulder screw
and slide the drive out to remove it from the drive bay.
6
If you are not replacing the drive, replace the drive panel insert (see
"Replacing the Drive-Panel Insert" on page 126).
7
Replace the drive panel (see "Replacing the Drive Panel" on page 127).
8
Replace the computer cover (see "Replacing the Computer Cover" on
page 172).
9
If you are removing and not replacing this drive, then be sure to disable the
drive in the BIOS. When you restart your computer, enter system setup
(see "System Setup" on page 178). On the setup screen go to the "Drives"
section and under
SATA 0 through 4
, set the SATA ports to the correct
configuration.
1 sliding plate 2 CD drive
2
1
book.book Page 145 Tuesday, November 27, 2007 10:29 AM