Filter
Top Products
98 Removing and Installing Parts
5
Remove the filler bracket or existing card (see "Removing PCI and PCI Express Cards" on page 95) to
create a card-slot opening.
6
Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, making
internal connections, or otherwise customizing it for your computer.
7
Position the card so that it is aligned with the slot and the securing tab (if present) is aligned with the
securing slot.
NOTE: If the card is full length, insert the card guide into the alignment slot on the fan bracket.
NOTICE: Ensure that you release the securing tab to seat the card. If the card is not installed correctly, you may
damage the system board.
8
Gently pull the securing tab (if present) and place the card in the connector. Press down firmly and
ensure that the card is fully seated in the slot.
1 PCI Express x16 card 2 securing tab 3 PCI Express x16 card slot
1
3
2