Filter
Top Products
Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
Revision January, 2008, Doc. Name: 2007PDD23000007 1-135
¾
WORD_DEVICE_I / WORD_DEVICE_E / WORD_DEVICE_L / WORD_DEVICE_M: Address must be 1
or the multiple of 16+1.
¾
WORD_DEVICE_X / WORD_DEVICE_Y / WORD_DEVICE_L / WORD_DEVICE_W: Valid address is
inconsecutive.
Contacts
Contact type Format Bit No.
BIT_DEVICE_X Xn n: 201 ~ 65464
BIT_DEVICE_Y Yn n: 201 ~ 65464
BIT_DEVICE_I In n: 1 ~ 16384
BIT_DEVICE_E En n: 1 ~ 4096
BIT_DEVICE_L Ln n: 1 ~ 65488
BIT_DEVICE_M Mn n: 1 ~ 9984
BIT_DEVICE_TU TUn n: 1 ~ 3072
BIT_DEVICE_CU CUn n: 1 ~ 3072
¾
BIT_DEVICE_X / BIT_DEVICE_Y : the last two digits of address must be less than 65 (1 ~ 64).
¾
BIT_DEVICE_X / BIT _DEVICE_Y / BIT _DEVICE_L : valid address is inconsecutive.
¾
Multiple Duplicate:
The next Bit address of X264 is X301 (invalid addresses X265 ~ X300
are skipped)
The next Bit address of X364 is X401.
The address of Y is the same as X.
(The Word addresses of X and Y also skip invalid addresses automatically)
C. Connections (Connector Pinouts)
It needs to use specific cable of YOKOGAWA ACE PLC.
RS-232
DOP
9 pin D-SUB male (RS-232)
Controller (6 pin)
(RS-232 for YOKOGAWA)
Controller (6 pin) (RS-232 for
YOKOGAWA)
RXD (2)
(1) TXD
TXD (3)
GND (5)
(2) RXD
(5) GND
Top View