Filter
Top Products
Chapter 3 Creating and Editing Screens
3.3.5 Recipe Group Register (Read / Write) : RCPG
This register is used to specify the 32-bit recipe group (Fig. 3-3-3). It is different than RCPNO.
The difference is that when using RCPG, not only the recipe number, the recipe group also
must be set. When the user wants to upload/download the recipe data of 1
st
number of 1
st
group, RCPG must be set to 1 and RCPNO must be set to 1. If HMI or the external controller
needs to read/write the recipe data of 4
th
number of 3
rd
group, RCPG must be set to 3 and
RCPNO must be set to 4. The recipe group number is determined when editing the recipe
table. For more details, please refer to the descriptions of Recipe Register RCP.
Note: The setting values of this register are not retained when power is off.
1st Group, RCPG = 1 3rd Group, RCPG = 3
1st Number, RCPNO = 1
Fig. 3-
3-3 Recipe Group Editing Screen
3.3.6 Recipe Register (Read / Write) : RCP
This register is used to save the recipe data that the user downloaded from HMI after exiting
Screen Editor software program. There are two kinds of recipe register, 16-bit recipe register
and 32-bit recipe register.
16-bit Recipe Register
The size of this register is 16bit (1 Word). If the data storage area is an external memory, i.e.
a USB disk or SM card is connected, the data space of 16-bit recipe register is 4MB words. If
the data storage area is an internal memory, the data space of 16-bit recipe register is 64K
words.
Revision May, 2010 3-19