Filter
Top Products
Chapter 3 Creating and Editing Screens
Example 2:
In Table 3-3-5, the size L is set to 3 and the number N is set to 2 with the recipe data. Thus
the layout of the recipe data will be shown as Table 3-3-6, i.e. RCP0~RCP8 are occupied.
When RCPNO is set to 2 and the recipe buffer area will show the 2
nd
number of recipe data.
Table 3-3-5 Recipe Table Table 3-3-6 Layout of Recipe Registers
32-bit Recipe Register
The size of this register is 32bit (2 Words or Double Word, DW). If the data storage area is an
external memory, i.e. a USB disk or SM card is connected, the data space of 32-bit recipe
register is 50MB words. If the data storage area is an internal memory, the data space of
32-bit recipe register depends on the specification of HMI flash memory. The user can refer
to the specifications shown on DOP-B series catalogue. Please note that not only recipe data,
there are also other screen data stored in flash memory. It indicates the total memory size of
the recipe data space must be less than the space of the flash memory. For more details,
please refer to HMI Memory dialog by clicking View > Memory List (Fig. 3-3-4).
RCP0
12
RCP1
33
RCP2
76
RCP3
36
RCP4
42
RCP5
1
RCP6
12
RCP7
33
RCP8
76
RCPNO = 2
Recipe Buffer
Ar
e
a
2nd Number of
Recipe Data
Fig. 3-
3-4 HMI Memory
Revision May, 2010 3-21