Filter
Top Products
Appendix A List of Functions Added
A.4 New Input Element
Barcode Input
This element is used to receive the barcodes which are scanned by a barcode reader through
USB interface. There are two options, Touch and Active in Input mode drop-down list.
When Input Mode is set to Touch:
If Input Mode is set to Touch, when touching the barcode input element on the screen, it will
enter into the waiting status to wait to receive the scanned barcodes. Touching the barcode
input element again can release the waiting status. If there are more than one barcode input
elements on the screen, after the first barcode input element receives the scanned barcode, the
system will not receive the next scanned barcode automatically. To receive other scanned
barcodes, the user needs to touch the other barcode input elements in sequence manually.
If the user wants to modify the barcode data manually, the user must set Popup Bit option. Once
the bit turned to ON, a keypad element will pop up on the screen for the user to enter the values
manually.
When Input Mode is set to Active:
A-10 Revision May, 2010