Filter
Top Products
Appendix A List of Functions Added
If Input Mode is set to Active, it needs to trigger the InterLock Address first. After the InterLock
Address is triggered, the barcode input element will enter into the waiting status to wait to
receive the scanned barcodes. If there are more than one barcode input elements on the screen,
after the first barcode input element receives the scanned barcode, the system will receive the
next scanned barcode automatically. To release the waiting status, the user needs to reset the
InterLock Address of the barcode input element.
If the user wants to modify the barcode data manually, the user must create a keypad element
on the screen first. Once the InterLock Address of the barcode input element is triggered, the
user can use the keypad element to enter the values manually.
Please note that the Popup Bit option is disabled when Input Mode is set to Active.
Revision May, 2010 A-11