D-Link DES-3010FA/GA User Guide
Page 112
– PV - Promiscuous — Indicates the port is part of a PV Promiscuous VLAN.
– PV - Isolated — Indicates the port is part of a PV Isolated VLAN.
– PV - Community — Indicates the port is part of a PV Community VLAN.
• Dynamic — Assigns a port to a VLAN based on the host source MAC address connected to the port.
• PVID — Assigns a VLAN ID to untagged packets. The possible values are 1-4094. VLAN 4095 is defined as
per standard and industry practice as the Discard VLAN. Packets classified to the Discard VLAN are dropped.
• Frame Type — Specifies the packet type accepted on the port. The possible field values are:
– Admit Tag Only — Only tagged packets are accepted on the port.
– Admit All — Both tagged and untagged packets are accepted on the port.
• Ingress Filtering— Indicates whether ingress filtering is enabled on the port. The possible field values are:
– Enable — Enables ingress filtering on the device. Ingress filtering discards packets that are defined to
VLANs of which the specific port is not a member.
– Disable — Disables ingress filtering on the device.
• Reserve VLAN — Indicates the VLAN selected by the user to be the reserved VLAN if not in use by the sys-
tem.
2. Select a port.
3. Click . The VLAN Interface Settings Page opens:
Figure 63: VLAN Interface Settings Page
4. Define the Interface, Port VLAN Mode, Dynamic, PVID, Frame Type, Ingress Filtering, and Reserve VLAN for
Internal Use fields.
5. Click . The VLAN interface settings are modified, and the device is updated.