Filter
Top Products
D-Link DES-3010FA/GA User Guide
Page 234
Viewing RMON Statistics
The Viewing RMON Statistics contains fields for viewing information about device utilization and errors that
occurred on the device. To view RMON statistics:
1. Click Advanced Setup > RMON > Statistics. The RMON Statistics Page opens.
Figure 150:RMON Statistics Page
The RMON Statistics Page contains the following fields:
• Interface — Indicates the device for which statistics are displayed. The possible field values are:
– Port — Defines the specific port for which RMON statistics are displayed.
– LAG — Defines the specific LAG for which RMON statistics are displayed.
• Refresh Rate — Defines the amount of time that passes before the interface statistics are refreshed. The
possible field values are:
– 15 Sec — Indicates that the RMON statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.
• Drop Events — Displays the number of dropped events that have occurred on the interface since the device
was last refreshed.
• Received Bytes (Octets) — Displays the number of octets received on the interface since the device was
last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
• Received Packets — Displays the number of packets received on the interface, including bad packets,
Multicast and broadcast packets, since the device was last refreshed.