D-Link DES-3010FA/GA Switch User Manual


 
Configuring SNMP
Configuring SNMP Security
Page 169
Defining SNMP Group Members
The SNMP Group Membership Page enables assigning system users to SNMP groups, as well as defining the
user authentication method.
1. Click System > SNMP > Security > Group Membership. The SNMP Group Membership Page opens:
Figure 106:SNMP Group Membership Page
The SNMP Group Membership Page contains the following fields:
User Name — Contains a list of user-defined user names. The field range is up to 30 alphanumeric charac-
ters.
Group Name — Contains a list of user-defined SNMP groups. SNMP groups are defined in the SNMP Group
Profile Page.
Engine ID — Displays either the local or remote SNMP entity to which the user is connected. Changing or
removing the local SNMP Engine ID deletes the SNMPv3 user database.
Local — Indicates that the user is connected to a local SNMP entity.
Remote — Indicates that the user is connected to a remote SNMP entity. If the Engine ID is defined,
remote devices receive inform messages.
Authentication — Displays the method used to authenticate users. The possible field values are:
MD5 Key — Users are authenticated using the HMAC-MD5 algorithm.
SHA Key — Users are authenticated using the HMAC-SHA-96 authentication level.
MD5 Password — The HMAC-MD5-96 password is used for authentication. The user should enter a
password.
SHA Password — Users are authenticated using the HMAC-SHA-96 authentication level. The user
should enter a password.