D-Link DES-3010FA/GA Switch User Manual


 
D-Link DES-3010FA/GA User Guide
Page 188
Modifying QoS Interface Settings
The QoS Interface Page allows network managers to modify the QoS settings assigned to a specific interface. To
set the QoS interface settings:
1. Click System > QoS > General Settings > Interface Settings. The QoS Interface Page opens.
Figure 120:QoS Interface Page
The QoS Interface Page contains the following fields:
Interface — The port or LAG for which the default CoS policy is defined.
Trust Mode — Indicates whether or not Trust Mode is enabled on the interface. The possible field values are:
Not enabled — Trust mode is not enabled on the interface.
Enabled — Trust mode is enabled on the interface.
Default CoS for Incoming Traffic — The default CoS value for incoming packets for which a VLAN tag is not
defined. The possible field values are 0-7. The default CoS is 0.
2. Click . The Edit Interface Settings Page opens: