D-Link DES-3010FA/GA Switch User Manual


 
Configuring Spanning Tree
Defining Multiple Spanning Tree
Page 149
by which frames can be transmitted. In configuring MSTP, the MST region to which the device belongs is defined.
A configuration consists of the name, revision, and region to which the device belongs.
Network administrators can define the MSTP instance settings using the MSTP Instance Settings Page
.
To define
MSTP instance settings:
1. Click Advanced Setup > Spanning Tree > MSTP > Instance Settings. The MSTP Instance Settings Page
opens:
Figure 91: MSTP Instance Settings Page
The MSTP Instance Settings Page
contains the following fields:
Instance ID — Specifies the VLAN group to which the interface is assigned.
Included VLAN — Maps the selected VLANs to the selected instance. Each VLAN belongs to one instance.
Bridge Priority — Specifies the selected spanning tree instance device priority. The field range is 0-61440
Designated Root Bridge ID — Indicates the ID of the bridge with the lowest path cost to the instance ID.
Root Port — Indicates the selected instance’s root port.
Root Path Cost — Indicates the selected instance’s path cost.
Bridge ID — Indicates the bridge ID of the selected instance.
Remaining Hops — Indicates the number of hops remaining to the next destination.
2. Click . The VLAN Instance Configuration Table opens: