Filter
Top Products
D-Link DES-3010FA/GA User Guide
Page 170
– No Authentication — No user authentication is used.
• Remove — Removes users from a specified group. The possible field values are:
– Checked — Removes the selected user.
– Unchecked — Maintains the list of users.
2. Click . The Add SNMP Group Membership Page opens:
Figure 107:Add SNMP Group Membership Page
In addition to the fields in the SNMP Group Membership Page, the Add SNMP Group Membership Page contains
the following fields:
• Authentication Method — Defines the SNMP Authentication Method.
• Authentication Key — Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The authentica-
tion and privacy keys are entered to define the authentication key. If only authentication is required, 16 bytes
are defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in hexadecimal
character strings is two hexadecimal digits. Each byte can be separated by a period or a colon.
• Privacy Key — Defines the privacy key (LSB). If only authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a period or colon.
• Password — Defines the password for the group member
3. Define the User Name, Group Name, Engine ID, Authentication Method, Password, Authentication Key, and
Privacy Key fields.
4. Click . The SNMP group membership is modified, and the device is updated.
To modify SNMP Group Membership Settings:
1. Click System > SNMP > Security > Group Membership. The SNMP Group Membership Page opens.
2. Click . The SNMP Group Membership Settings Page opens: