Filter
Top Products
Managing System Logs
Enabling System Logs
Page 201
Enabling System Logs
The Syslog Properties Page contains fields for defining which events are recorded to which logs. It contains fields
for enabling logs globally, and parameters for defining logs. Log messages are listed from the highest severity to
the lowest severity level. To define system log parameters:
1. Click System > Syslog > Properties. The Syslog Properties Page opens.
Figure 128:Syslog Properties Page
The Syslog Properties Page contains the following fields:
• Enable Logging — Indicates if device global logs for Cache, File, and Server Logs are enabled. Console
logs are enabled by default. The possible field values are:
– Checked — Enables device logs.
– Unchecked — Disables device logs.
• Severity — The following are the available log severity levels:
– Emergency — The highest warning level. If the device is down or not functioning properly, an emergency
log message is saved to the specified logging location.
– Alert — The second highest warning level. An alert log is saved, if there is a serious device malfunction;
for example, all device features are down.
– Critical — The third highest warning level. A critical log is saved if a critical device malfunction occurs; for
example, two device ports are not functioning, while the rest of the device ports remain functional.
– Error — A device error has occurred, for example, if a single port is offline.
– Warning — The lowest level of a device warning. The device is functioning, but an operational problem
has occurred.