Filter
Top Products
D-Link DES-3010FA/GA User Guide
Page 50
Starting the D-Link Embedded Web Interface
This section contains information on starting the D-Link Embedded Web interface. To access the D-Link user
interface:
1. Open an Internet browser.
2. Ensure that pop-up blockers are disabled. If pop-up blockers are enable, edit, add, and device information
messages may not open.
3. Enter the device IP address in the address bar and press <Enter>. The Enter Network Password Page
opens:
Figure 15: Enter Network Password Page
4. Enter your user name and password.
Notes
• The device is configured with a user name that is admin and a password that is blank, and can be
configured without entering a password.
• Passwords are case sensitive.
• To operate the device, disable all pop-ups with a popup blocker.
5. Click . The D-Link Embedded Web Interface Home Page opens: