Filter
Top Products
D-Link DIV-140 User Guide 16
Character:
Default Route:
Route all calls to
VoIP Server:
For example, the feature key sequence to initiate call hold feature is *111. If character termination is enabled to # then you can dial *111# for the
same.
Enter the character to use for termination. Range: 0 to 9, * or #. Default: #
Here you can configure how calls should be routed.
Enable this if all calls including calls to local FXO ports should be routed to the VoIP server. Default: Enable.
Note: If this field is enabled, then the calls to local FXO ports will fail if the VoIP server is not available.