Filter
Top Products
D-Link DIV-140 User Guide 20
Media Configuration
RTP Port Range:
QoS:
ToS:
VLAN ID:
User Priority:
Configure the port range to be used for RTP streaming. This
range should be larger than twice the maximum number of
simultaneous calls as each call needs two ports (RTP + RTCP).
Range: 1024 to 65535. Default: 6000 to 10000.
Parameters for various Quality-of-Service mechanisms can be
set in this section. These are used to prioritize the RTP packets
on the network.
This field specifies the Type-of-Service value that is used for
RTP packets. Recommended value is 160. Range: 00 to 255.
Default: 160.
This feature will be supported in future releases.
This feature will be supported in future releases.