Filter
Top Products
D-Link DIV-140 User Guide 3
Introduction
Product Overview
The D-Link Analog Trunk Gateway DIV-140 is a full featured multi port SIP based VoIP gateway. It links traditional telephone network and
IP network. Using the DIV-140 you can explore the wide features of VoIP technology. It enables you to make and receive calls through a
low cost VoIP network using a conventional telephone network setup.
The advanced technology behind the DIV-140 presents a highly scalable and flexible architecture to cater to the needs of varied market
segments.
The highly flexible call routing settings allow the administrator to configure different routes for calls based on the dialed number. It provides
configuration to route all local PSTN numbers through PSTN lines and all long distance calls through different VoIP networks. Both, proxy
based calls and peer to peer calls, are supported simultaneously. It supports per port phone book and system phone book to place peer
to peer calls without going through a VoIP server.
It supports per port speed dial lists and system speed dial lists to enable quick dialing to frequently accessed numbers. Also various call
features can be individually configured for each port to different destinations.
With support to configure IP settings manually or use DHCP or PPPoE, the DIV-140 can work in different environments. Also, NTP is
supported with standard time zone configuration to keep the device time in sync with a server.
In VoIP server mode, each port can be configured with different account or the feature can be enabled to use same account for all ports.
With backup server configuration support, the device can still work in absence of primary server. The support for STUN and IP Sharing
enables the device to work behind NAT.
It provides secure web based management interface with administrative and restricted accesses to remotely configure and monitor the
system. The configuration backup facility helps in maintaining multiple configurations for the device.