Filter
Top Products
D-Link DIV-140 User Guide 22
Used to authenticate the device with a SIP server. This field accepts only letters, digits, hyphen and underscore and can be a maximum of 30
characters.
This feature will be supported in future releases.
This is useful in traversing a firewall.
Enter the IP address or domain name of the outbound proxy server. This is the address where SIP messages will be sent.
Enter the outbound proxy server port in this field.
This is the port used by device to send and receive the SIP messages. Default: 5060.
If you enable this field, the device will un-register before sending registration requests for endpoints on every boot up.
If this feature is enabled the device uses DNS/SRV records to find the port on which SIP service are running for the configured SIP domain name.
If it is disabled it will connect directly to the configured server port.
This feature will be supported in future release.
Authentication
Password:
User Parameter:
Outbound Proxy:
Server Address:
Port:
Local Port:
Un-register at Boot Up:
Use DNS/SRV:
Subscribe for Message
Waiting Indication: