Filter
Top Products
Chapter 5 Operating SCU 37
ACTURA Flex 48330 Power System User Manual
other shows hour, minute and second. The year is displayed with 4 digits; other
time units are in 2 digits.
10:09:16
53.5V 125 A
System: No alarm
Auto /BC
2004-09-16
53.5V 125 A
System: No alarm
Auto /BC
Note
1. At this page, you may use “” and “" to adjust the LCD contrast (7-level).
2. If there has been no keypad operation for 8 minutes, the monitoring module will return to
the first system information page. The time of that return will be recorded automatically,
and can be queried through the host.
5.3.2 Other System Information Screen
The system information is shown in many pages. The default page of the
monitoring module after the system power on is the system information first page.
You can press “
” or “” to scroll up or down to view more operation information,
as shown in the following page:
Battery information page
Batt1: 295 A
Actual: 99.1%
Batt2: 0 A
Remain: 0%
1. Battery 1, battery 2
They represent respectively the current of the battery that battery shunt 1 and shunt
2 is connected to. If the “Shunt Coeff” of a certain battery group is set to “No”, this
situation will be reflected at the battery information page by “Not connected”, and
no actual capacity will be displayed.
Note
There is only one current shunt in the system, that is “shunt 1”.