Filter
Top Products
UM1M820BNA User Instructions
Issue AH, March 4, 2013 Spec No. 1M820BNA (Model M820B)
Spec No. 1M820DNA (Model M820D)
104 Chapter 3. Local Display Menus
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SMDU
SMDU 1 Menu
Menu Navigation: Main Menu / Settings / SMDU / SMDU 1
Note: For WEB Interface; menu items are found under Device Information / SMDU Group / SMDU 1
/ Settings Tab.
"SMDU 1" Parameter Settings:
Shunt 1 Voltage: Enter the shunt 1 voltage rating.
Shunt 1 Current: Enter the shunt 1 current rating.
Shunt 2 Voltage: Enter the shunt 2 voltage rating.
Shunt 2 Current: Enter the shunt 2 current rating.
Shunt 3 Voltage: Enter the shunt 3 voltage rating.
Shunt 3 Current: Enter the shunt 3 current rating.
Shunt 4 Voltage: Enter the shunt 4 voltage rating.
Shunt 4 Current: Enter the shunt 4 current rating.
Shunt 5 Voltage: Enter the shunt 5 voltage rating.
Shunt 5 Current: Enter the shunt 5 current rating.
Converter
All Conv Set Menu
Menu Navigation: Main Menu / Settings / Converter / All Conv Set
Note: For WEB Interface; menu items are found under Device Information / Converter Group /
Settings Tab.
"All Conv Set" Parameter Settings:
Output Voltage: Sets the output voltage for all converters.
Under Voltage: Sets the Under Voltage alarm point.
Over Voltage: Sets the Over Voltage alarm point.
Over Current: Sets the Over Current alarm point.
HVSD: Enables or disables the High Voltage Shutdown feature for all converters.
HVSD Limit: Sets the High Voltage Shutdown point for all converters.
Current Limit: Enables or disables output current limit.
Current Limit Pt: Sets the output current limit point.
Conv #1 Menu
Menu Navigation: Main Menu / Settings / Converter / Conv #1
Note: For WEB Interface; menu items are found under Device Information / Converter Group /
Converter #1 / Settings Tab.
" Conv #1" Parameter Settings:
Set Conv ID: Sets the converter position in the system.