Filter
Top Products
User Instructions UM1M820BNA
Spec No. 1M820BNA (Model M820B) Issue AH, March 4, 2013
Spec No. 1M820DNA (Model M820D)
Chapter 4. WEB Interface Menus 155
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
4.8.6 PLC Sub-Menu
Allows you to configure the PLC functions of the Controller.
The following shows the PLC sub-menu.
Operation
The PLC function normally runs every 10 seconds. It starts by executing the first line and stores the result
in the output signal/register. Then executes the next line and continues executing line by line until it
reaches the end. The PLC function will be stopped if the ACU+ is set to Manual Mode.
Procedure
1) Click the ADD button and the window below is shown.