Filter
Top Products
5-139
Maintaining and Transporting the Printer | 139
Examining the BI-D ALL Alignment Pattern
Follow the steps below when the BI-D ALL patterns finish printing.
IMPORTANT: Do not enter an adjustment value for K1 when
prompted, or your color adjustments won’t be accurate.
1. Depending on the width of the paper loaded in the printer, more than
one set of patterns may be printed. Locate the patterns in the middle of
your printout. In the steps that follow, refer to those patterns to make
your adjustments, instead of the ones printed toward the left or right.
2. Look at the display screen on the printer. It shows
#1 K1.
Do not change the adjustment value for K1. Press
Enter and continue
with the following steps.
Note
Be sure to perform the
BI-D BLACK adjustment
before running this one.
Refer to middle set of patterns
when making adjustments