Epson 9600 Printer User Manual


 
14
14 | Introduction
ENERGY STAR Compliance
As an ENERGY STAR Partner, EPSON has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
The EPA ENERGY STAR Office Equipment program is a voluntary
partnership with the computer and office equipment industry to promote
the introduction of energy-efficient personal computers, monitors, printers,
fax machines, and copiers in an effort to reduce air pollution caused by
power generation.
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure
you use the equipment safely and effectively.
Turn off and unplug the printer before cleaning. Clean with a damp
cloth only. Do not spill liquid on the printer.
Do not place the printer on an unstable surface or near a radiator or
heating vent. Avoid areas subject to rapid changes in temperature and
humidity or shock and vibrations.
Do not place the printer near a window or in direct sunlight. Bright
light can interfere with the paper sensors, causing paper jams and related
problems.
Keep the entire system away from potential sources of electromagnetic
interference, such as loudspeakers or the base units of cordless
telephones.
Place the printer on a flat surface. It will not operate properly if it is
tilted or at an angle.
Do not block or cover the openings in the printer case or insert objects
through the slots.
Use only the type of power source indicated on the label.
Connect all equipment to properly grounded power outlets. Avoid using
outlets on the same circuit as photocopiers or air control systems that
regularly switch on and off. Do not use outlets controlled by wall
switches or timers.
Caution
Always turn the printer
off using the Power
button. When you press
this button, the Operate
light flashes briefly, then
goes out. Do not unplug
the printer or turn off the
power to the printer until
the Operate light is off.
This ensures that the
print head is safely
capped.