Filter
Top Products
1-62
62 | Setting Up the Printer
3. The printer is now prompting you to choose the best block in the group
labeled
K2 in row #1.
4. Use your own eye loupe or the one that came with the printer to
determine which block has the least visible vertical line. In this example,
the middle block (numbered 5) is the best choice.
5. If number 5 is the best block, press
Enter to accept it (5 is the default
setting). Otherwise, use the
u or d button to select the number of the
best block, then press
Enter.
6. Repeat this process to examine the remaining blocks in row #1: C, M,
Lc, Lm, and Y. In each case, select the number of the best block, then
press
Enter.
7. Repeat this process to examine the groups of blocks in rows #2 and #3.
IMPORTANT: Do not enter an adjustment value for K1 when
prompted, or your color alignments won’t be accurate.
8. When done, press Pause to exit the head alignment. The printer will
remember your alignment values and use them when printing.
R
ow
#1 L
oo
k
at t
hi
s group
Note
You must use at least a
10× eye loupe to check
the pattern.
Look for the block with the smallest gap
Note
If number 5 is the best
block in each group, the
print head is already
properly aligned. Press
Pause to exit the head
alignment early.