Filter
Top Products
5-149
Maintaining and Transporting the Printer | 149
5. Press Enter. You see SELECT INK SET.
6. Press
u or d to select the correct option for the ink mode you want to
switch to:
7. Press
ENTER.
If you see the message
NOT ENOUGH INK, lift the ink lever and
remove any low or empty cartridges. (Check the
Ink Out lights on the
control panel to see which cartridges are low or empty.) Insert the
replacement cartridge(s), then lower the ink lever.
8. The printer displays a message telling you to release the ink lever and
remove the cartridges. Raise the lever and remove all the cartridges; do
not re-insert them until instructed to do so.
Be sure to set aside any black ink cartridges you won’t be using, so that
you don’t accidentally re-insert them.
Ink mode Option displayed on printer
Matte Black Mode #1 MAT: #2 LBK
Dual Matte Black Mode #1 MAT: #2 MAT
Photo Black Mode #1 PBK: #2 LBK
Note
The display indicates
which cartridges will be
installed in the first and
second ink slots (Matte
Black, Light Black, or
Photo Black). You may
not need to replace both
cartridges, depending on
the mode you want to
switch to.
Caution
Do not turn off the printer
once the cartridges are
removed.
If a power failure occurs,
turn the printer back on.
You can resume the
procedure at the point
where it was interrupted.