Filter
Top Products
Using the SUB CONFIG Option
* OFF
ON
You can use this option to change the character spacing.
Condensed printing is useful for spreadsheets and other
applications where you need to fit the maximum amount of
information on each line. The 15 cpi character pitch cannot be
condensed.
0 to available
This option allows you to set the left margin position. Margin
units are determined by the current pitch (characters per inch) and
the condensed setting (on or off). If you select proportional, 10 cpi
and condensed are used to determine margin units. If you change
the setting of ORIENT, P-SIZE, or WIDE PAGE (when P-SIZE is
set to A4 or F4) the left margin defaults to 0. The factory setting
is 0.
1 to available
This option allows you to set the right margin. Margin units are
determined by current pitch (characters per inch) and the
condensed setting (on or off). If proportional is selected, 10 cpi and
condensed are used to determine margin units. The factory setting
is 80. If you change the setting of ORIENT, P-SIZE, or WIDE
PAGE (when P-SIZE is set to A4 or F4) the right margin defaults
to the following settings:
3-42
SelecType