Filter
Top Products
SelecType Problems
Problem Solution
SelecType does not
function as expected.
Settings made with
SelecType are
ignored.
You may not have saved your settings
before turning off or resetting the printer.
Save your settings with SAVE MACRO in
SelecType Level 1 or with P-CONFIG
SAVE in Level 2. Once you save Level 1
settings in a macro, select a correct macro
ID number for the POWERON MACRO
option, or SelecType settings return to
their previously saved default settings after
you turn off or reset the printer.
The software may either be changing the
defaults on the printer or initializing the
printer. This may require that you change
the initialization sequence sent by your
software. See your software manual for
more information.
You may be trying to set certain
combinations of settings with SelecType
that cannot be acted on by the printer.
Usually, SelecType does not allow you to
make incompatible combinations. However,
certain combinations are not checked for
compatibility until after you exit
SelecType and set the printer on line.
Others are not checked at all. See Chapter
3 for more information about SelecType.
7-28
Troubleshooting