Filter
Top Products
Status and Error Messages
[E] CARD MEMORY OVERFLOW
This message indicates that the combined memory
requirement of the cards in slots A and B exceeds 4 Mbytes.
To correct this problem, remove one or more of the cards and
then press the CONTINUE button.
[S] COPY END X/X
Multiple-copy printing is cancelled (you pressed the COPY END
button when the printer was off line).
[E] COVER OPEN
The printer cover is open or the imaging cartridge is not
installed. Close the printer cover or install the imaging
cartridge. Then press CONTINUE to continue printing.
[S] DATA
The printer has received data but is not yet printing, or the
printer has received data and is off line. To resume printing,
press ON LINE if the printer is off line, or press the FEED
button.
[E] FEED JAM
Paper is not feeding into the printer from the specified
cassette or has jammed on its way into the printer. If the
paper is jammed at the paper cassette, open the printer case,
remove the jammed paper from the standard paper cassette or
optional paper cassette and then close the printer. See Clearing
a feed jam later in this chapter for more information.
[S] GRAPHIC DRAWING
Graphics are being created.
Troubleshooting 7-3