Filter
Top Products
Problems with Graphics
Problem Solution
Graphic images
do
not print.
After changing the
printer mode, you
are unable to print
graphics.
You cannot print
graphics using the
serial interface (RS-
232C or RS-422).
When printing a
mix of text and
graphics, the page
does not print or is
only partially
printed. The display
may also show SET
FULL PRINT.
Graphics cannot be
printed and the
display shows PAGE
BUFFER FULL.
You may not have the correct printer
driver installed. If you try to print with a
software package set for another printer,
nothing will be printed. Make sure that
the driver matches the currently selected
operating mode.
The WORD LENGTH option in SelecType
Level 2 may not be set correctly. When
printing graphics, make sure that you set
an B-bit data word.
The full print buffer setting needs to be
changed. To correct this error, change the
FULL PRINT setting in SelecType Level 1
as described in Chapter 3.
The full print buffer or the receive buffer
setting needs to be changed. To correct this
error, change the FULL PRINT or
RX-BUFFER setting in SelecType Level 1
as described in Chapter 3.
7-26
Troubleshooting